3Di-D300 v2.0
Our Big Daddy Range of 3D Printers that caters to Industries ranging from Injection Moulding to Electronic Enclosures
Faster Print Speeds
3Di-D300 v2.0 has faster print speeds
Wireless Connectivity
Wireless Data transfer of files
Technical Specification
| |
Print technology | FFF (Fused Filament Fabrication) |
Build volume | 400mm Diameter x 450mm Height |
Extruders | Single Extruder |
Nozzle diameter | 0.4mm (Interchangeable from 0.2mm to 0.8mm) |
Print resume on power outage | Yes (Recommended to connect with Inverter) |
Filament run out sensor | Yes |
Build plate levelling | Semi-Automatic Bed Levelling |
Display Control Panel | Full Touch 7” LCD |
Electronics Processor | 32 bit |
Print speed | Up to 120mm/s |
Mechanics – XYZ | Higher Quality Linear Guides |
Feeder type | Bowden Drive (E3D v6) |
Enclosure | Fully Enclosed |
Heated Chamber | No |
| |
Layer Resolution | 50 microns (0.2mm nozzle) till 600 microns (0.8mm nozzle) |
Operating Temperature | 15⁰C to 35⁰C |
Nozzle temperature | 300⁰C |
Heating bed | Heat bed up to 110⁰C |
Build plate | Removable Glass build plate |
Printing accuracy | +/- 0.3mm |
| |
Filament Diameter | 1.75mm |
Supported Filaments | PLA, ABS, PETG, Nylon, Nylon-Carbon Fibre, Composite Materials* (* – requires hardened steel nozzle.) |
Filament Support | Open filament from any branded company. |
|
|
Supported File types | .STL, .OBJ, .AMF |
Supported OS | Windows, MacOS, Linux |
File transfer and Connectivity | USB, SD-Card |
Slicing software | Cura/Simplify3D |
Printer control Software | Pronterface |
|
|
Input | 240V AC, 50Hz |
Happy Customers & Buyers
Get In Touch or Visit The Office Anytime
We are open to hear your problems and provide adequate solutions to them.
Feel free to contact us in case of any queires
+91-9503817139
[email protected]